Checking the wiring
- Ignition off
- The breakout box connected.
Check the communication cable between transmission control module (TCM) terminal #27 and engine control module (ECM) terminal #27. Check for an open-circuit according to Open-circuit, permanent faults . Check for a short-circuit to ground according to Short-circuit to ground, permanent faults . Check for a short-circuit to supply voltage according to Short-circuit to supply voltage. Permanent faults .
Check the communication cable between transmission control module (TCM) terminal #26 and engine control module (ECM) terminal #57. Check for an open-circuit according to Open-circuit, permanent faults . Check for a short-circuit to ground according to Short-circuit to ground, permanent faults . Check for a short-circuit to supply voltage according to Short-circuit to supply voltage. Permanent faults .
Remedy as necessary.
Other information:
- To connect the breakout box to the transmission control module (TCM) and engine control module (ECM), see Connecting the breakout box
- For information about transmission control signals, see Signal description. Transmission control module (TCM)
- For information about engine control module (ECM) (naturally aspirated engines) signals, see Connector A terminal A#1-90
- For information about engine control module (ECM) (turbocharged engines) signals, see Signal specification .
- Continue
Refer to Information