Internal fault. Permanent fault: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on
- Wait at least three minutes so that the control module has time to carry out its diagnostic
- Read off diagnostic trouble codes (DTCs).
The fault has been remedied if the status of the diagnostic trouble code (DTC) has changed to intermittent.
Has the status of the diagnostic trouble code (DTC) changed to intermittent?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to Information