Checking diagnostic trouble codes (DTCs) in the engine control module (ECM)
HINT: Diagnostic trouble codes (DTC) DSA-224 are stored if any of the following diagnostic trouble codes (DTCs) are permanently stored in the engine control module (ECM) and if the fault is permanent: EFI-115, EFI-121, EFI-125, EFI-135, EFI-137, EFI-145, EFI-337, EFI-411, EFI-525 or EFI-526.
- Start the engine and let it idle.
Read off diagnostic trouble codes (DTCs) from the engine control module (ECM) .
Have any of the above diagnostic trouble codes (DTCs) been stored?
- YES
Refer to Checking diagnostic trouble codes (DTCs) in the engine control module (ECM)
- NO
Refer to Checking wiring and terminals
HINT: All diagnostic trouble codes (DTCs) in EMS 2000 must be remedied before diagnostic trouble code (DTC) DSA-224 can be remedied.
- Start the engine and let it idle.
Read off diagnostic trouble codes (DTCs) from the engine control module (ECM) .
Have any diagnostic trouble codes (DTCs) for EMS 2000 been stored?
- YES
Refer to Checking diagnostic trouble codes (DTCs) in the engine control module (ECM)
- NO
Refer to Checking wiring and terminals
Fault-trace according to the relevant system.