Checking for an open-circuit

FENIX 5.1 

• Check the cable between DSA control module connector terminal 13 and engine control module (ECM) terminal 37 for an open-circuit according to Open-circuit, permanent faults .

EMS 2000 

• Check the cable between DSA control module connector terminal 13 and engine control module (ECM) terminal 71 for an open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Checking For Open Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification