LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> V40 Base >> Repair and Diagnosis (Single Page) >> Electrical >> Motors, Switches, Relays >> Central Electronic Module (CEM) - Design And Function >> Central Electronic Module (CEM) (2000-2004) >> Diagnostic functions >> Programming automatic low beam

Programming automatic low beam

This parameter determines whether low beam should be on when the ignition is switched on and the lighting switch is in position 0.

This function is market dependent. Contact the dealer if you are not sure about this function. Unless otherwise stated, automatic low beam is standard for the USA. 

scientia non olet · About LEMON Manuals