Replacing the component

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

The control module has registered an internal fault. Try a new control module.

NOTE:

New control modules are delivered with pre-programmed values from the factory. The control module must be programmed with the relevant data for the market, body type etc. in order for it to function correctly after replacement.

The programmed values must therefore be read from the existing control module and noted.

Ignition on.
Read off the values programmed into the control module.

Other information:

To access / replace the central electronic module (CEM), see Replacing central electronic module (CEM) .
For information about programming, see Description of programmed data .

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Central Electronic Module (CEM), Model Year 2000-

Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Information