LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> V40 Base >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Central Electronic Module (CEM) - Vehicle Communication Information >> Vehicle Communication Information. Central Electronic Module (CEM) (2000-2004) >> Description of programmed data >> Automatic low beam

Automatic low beam

This parameter determines whether low beam will be on when the ignition is switched on and when the lighting switch is in position 0 and also within which range the instrument lighting can be adjusted using the control. The available range for the instrument lighting is fixed in percentage for each setting.

NOTE: This function is market dependent. Contact the dealer if uncertain about this function. Unless otherwise stated, automatic low beam is standard for the USA.

The following alternatives are available: 

NOTE: In Europe a new central electronic module was introduced in week 13 2003. The part number is 3063 8707 and 3063 8708. These control modules must be programmed with a range of 6-100% instead of 20-100%. Older control modules are still programmed with a range of 20-100%. The newer control module cannot be programmed with settings of a range of 20-100%. The older control module cannot be programmed with a range of 6-100%.
scientia non olet · About LEMON Manuals