LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> V40 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Lock & Alarm - Specifications, Electrical/Electronic >> Programmable Customer Parameters (2000-2004) >> Programmable customer parameters >> Engine management system, EMS2000 >> Programming a new control module

Programming a new control module

Fig 1: Engine Management System, EMS2000
GLL114328Courtesy of VOLVO CARS OF NORTH AMERICA.

PIN codes must be programmed into the control module after a new EMS 2000 engine control module (ECM) has been installed in the car. The PIN codes are retrieved from the Volvo central database. The new control module must be installed in the car before this programming is carried out. The malfunction indicator lamp (MIL) will flash on a new control module until the programming is complete.

Programming can be found in VIDA vehicle communication, function group 2. Requires Volvo scan tool.

scientia non olet · About LEMON Manuals