Signal missing. Permanent fault: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect connector, install components etc.
• Ignition on.
• Turn on the phone.
• Wait approximately 20 seconds.

  Click on the VCT 2000 symbol to read the diagnostic trouble codes.

  Check that the status of the current diagnostic trouble code has changed from permanent to intermittent fault.

  Fig 3: Identifying VCT2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Did the status of the diagnostic trouble code change? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  The fault should have been detected and remedied. As this is not the case fault-tracing has failed.

  Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.