Checking the component

• Check that the back-up (reversing) lamp relay (position 2/80) is correctly installed
• Remedy as necessary.

  Activate the back-up (reversing) lamps by pressing ON and OFF a few times.

  Other information: 

  • For further information about signals and other values, see Signal specification
  • To access and replace the relay, see Integrated relay/fuse box cargo compartment/rear electronic module, replacing
  • When the relay is installed and not activated, the voltage at the relay guide should be 12 V.
  Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 2: Identifying Relays

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Do the back-up (reversing) lamps function? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Replacing the component