Checking the power supply and ground for the driver door module (DDM)

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.

  Check that the fuse for the control module is intact.

  Check the power supply and ground terminal as instructed.

  Other information: 

  • See Checking the power supply and ground terminals
  • For information about fuse and terminal numbers, see the relevant Wiring Diagram.
  • See Contents

Was a fault detected? 

• YES 

  Refer to Checking the function of the driver door module (DDM) 

• NO 

  Refer to Signal missing