Checking components and wiring
Check the power supply cable between accessory control module terminal #B1 and the remote start unit connector. Check for a short-circuit to ground.
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting the breakout box. Accessory electronic module
- To access or replace the accessory electronic module and connector, see Replacing the accessory electronic module
- For information about signals, see Signal description. Accessory electronic module (AEM)
- To access or replace the remote start unit, see Replacing the remote starter unit
- To fault-trace wiring and terminals see Contents
- Continue
Refer to Verification