Signal Specification
WARNING: This page is about a different variant/trim than selected.
General
NOTE:
It is important to check ground terminals before taking readings.
| U= | DC voltage in volts (V) | Ulow = | Voltage approximately 0 V |
| Ubat = | Battery voltage (V) |
CONNECTOR A
| Terminal | Signal type | Ignition on | Other |
|---|---|---|---|
| #A1 | Antenna signal | 0-4.75 V | Pulse |
CONNECTOR B
| Terminal | Signal type | Ignition on | Other |
|---|---|---|---|
| #B1 | 30 supply | U = Ubat | -- |
| #B2 | -- | -- | -- |
| #B3 | -- | -- | -- |
| #B4 | -- | -- | -- |
| #B5 | Ground | U=Ulow | -- |
CONNECTOR C
| Terminal | Signal type | Ignition on | Other |
|---|---|---|---|
| #C1 | MOST input signal | Optical input signal when the MOST network is activated | -- |
| #C2 | MOST output signal | Optical output signal when the MOST network is activated | -- |