Checking For An Open-Circuit

Check the cable between immobilizer control module #7 and VGLA control module #A11 for open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Control Module Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohm Meter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Terminals Of Connector B And Connector A

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select Continue when the fault has been remedied. 

• Continue 

  Refer to Verification