Signal Specification
WARNING: This page is about a different variant/trim than selected.
GENERAL
| U= | DC voltage in volts (V) | UAC = | AC voltage in volts (V) |
| Ubat = | Battery voltage (V) | f = | Frequency in Hertz (Hz) |
| Ulow = | Voltage approximately 0 V | t = | Time in seconds |
| PWM = | Pulse width modulated signal as a % |
Connector C784
SIGNAL TABLE
| Breakout box terminal | Control module terminal | Signal type | Ignition on | Ignition off | Other |
|---|---|---|---|---|---|
| - | #C784-1 | 30-feed | U = Ubat | U = Ubat | - |
| - | #C784-2 | ground, 30 supply | U=Ulow | U=Ulow | - |
Connector C782
SIGNAL TABLE
| Breakout box terminal | Control module terminal | Signal type | Ignition on | Ignition off | Other |
| - | #C782-1 | Input, antenna | - | - | - |
Connector C786
SIGNAL TABLE
| Breakout box terminal | Control module terminal | Signal type | Ignition on | Ignition off | Other |
| - | #C786-1 | Output, optical | - | - | - |
| - | #C786-2 | Input, optical | - | - | - |