Adjusting Front Toe Angle
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2011 Volvo V50, 2010 Volvo V50, 2009 Volvo V50, 2008 Volvo V50, and 2007 Volvo V50. However, it is still accessible from the selected car via links, so may be relevant.
Adjust with the tie rods after loosening the lock nuts. Adjusting towards a positive value will give toe-in and towards a negative value toe-out. To obtain correct values on respective model variants, refer to WHEEL ALIGNMENT .
NOTE:
The lengths of the tie rods must not vary between themselves by more than 2mm. Measure between the lock nut and the edge of thread.
Tighten the lock nut, outer steering arm inner to steering arm inner. See TIGHTENING TORQUE .
Treat the strut threads using rustproofing agent after tightening.