Checking The Status

Fig 1: Identifying Ignition ON

GLL101051

Courtesy of VOLVO CARS CORPORATION

Ignition on
Read off the movement of the accelerator pedal by carefully depressing and releasing the accelerator pedal (AP).
Check that the value changes with accelerator pedal movement. The value must be approximately 0.4 V when the accelerator pedal (AP) is unaffected and approximately 4 V when the accelerator pedal (AP) is fully depressed.

The fault is intermittent at the moment if the values are OK.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS CORPORATION

Continue
Refer to CHECKING THE POWER SUPPLY