Checking Wiring And Connectors
Check the wiring between fuel level sensor connector terminal #7 and the rear electronic module (REM) terminal #A08 (#A8). Check for an intermittent short-circuit to ground. Check for an intermittent open-circuit.
Check the ground lead between control module terminal #A10 (#A10) and fuel level sensor connector terminal #6. Check for an intermittent open-circuit.
Check the cables between the left and right fuel level sensors. Check for an intermittent open-circuit.
Other information:
- For further information about signals and other values, see SIGNAL SPECIFICATION
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX
- To access the control module, see RELAY/FUSE BOX CARGO COMPARTMENT/REAR ELECTRONIC MODULE (REM), REPLACING
- To access the fuel level sensor (left-hand side), see LEVEL SENSOR FUEL TANK LEFT, REPLACING
- To access the fuel level sensor (right-hand side), see LEVEL SENSOR, FUEL TANK, RIGHT-HAND/FUEL TANK, REPLACING
- see CHECKING WIRING AND TERMINALS .
- Continue
Refer to INFORMATION