Pulse width modulation (PWM) signal too low: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition On Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  Activate the read off of the signals from the accelerator pedal (AP) position sensor.

  Check that the value for both signals is approximately 8% when the accelerator pedal (AP) is unaffected and approximately 82% when the pedal is fully depressed.

  Fig 3: Identifying VCT2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Do the values correspond? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information