Internal fault: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect the connectors, install the components etc.
• Ignition on.
• Gear selector in position P.
• Activate solenoids S1, S2, S3, S4 and S5 separately.

  The status should alternate between OFF and ON.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Has the status changed? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information