Connecting the breakout box
Special tools:
- Ignition off
- Remove the door panel
- Disconnect the module connectors.NOTE: Disconnect the 12-pin connector before the 30-pin connector.
Connect the adapter to the control module connector. Connect breakout box 9511428 . Connect wiring 9511499 to the adapter.
Adapter wiring 9511507 is for the 12-pin connector. Adapter wiring 9813194 is for the 30-pin connector.
Disconnect the breakout box in reverse order.
Other information
- To remove the door panel, see Panel, front side door, replacing (-2003) or Panel front side door, replacing (2004-)
- For further information about signals and other values, see Signal specification .