Signal too high or temperature too high: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Switch off the ignition. Wait at least 15 seconds
• Reinstall the connectors, components etc.
• Read off the diagnostic trouble codes (DTCs) by clicking on the VCT2000 symbol.

  Check that the diagnostic trouble code (DTC) for too high voltage is not stored again.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the diagnostic trouble code (DTC) recur? 

• YES 

  Refer to Information 

• NO 

  VERIFIED:  Troubleshooting has been completed.