Checking the signal cable

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.

  Connect an ohmmeter between air conditioning (A/C) condenser fan relay base terminal #2 and ground.

  Fig 2: Identifying Air Conditioning (A/C) Relay Terminals

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Identifying Ohmmeter

  Courtesy of VOLVO CARS OF NORTH AMERICA.

The ohmmeter should read infinite resistance. 

• OK 

  Refer to Checking the air conditioning (A/C) condenser fan relay 

• NOT OK 

  Refer to Checking the signal cable 

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.

  Check the cable between air conditioning (A/C) condenser fan relay base terminal #2 and engine control module (ECM) connector terminal #69 for an open-circuit according to Open-circuit, permanent faults .

  Remedy as necessary.

  Fig 2: Identifying EMS2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Identifying Ohmmeter

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying Air Conditioning (A/C) Relay Terminals

  Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification 

Check the cable between air conditioning (A/C) condenser fan relay base terminal #2 and the engine control module (ECM) connector terminal #69 for a short-circuit to ground according to Short-circuit to ground, permanent faults .

Remedy as necessary.

Fig 1: Identifying Air Conditioning (A/C) Relay Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying EMS2000

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification