LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S80 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Control Modules - Design And Function - 1 Of 4) >> Central Electronic Module (CEM) (2005-2009) >> Diagnostic Functions >> Reading Off And Programming Data

Reading Off And Programming Data

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.

This function allows programmed data to be read off or data such as customer parameters to be programmed in.

NOTE:

If possible, all data must be read out from the control module before replacement. After replacement the relevant data must be programmed into the new control module. The data must be read off before the control module is replaced. This is so that the same information can be programmed in to the new control module.

scientia non olet · About LEMON Manuals