LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S80 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Central Electronic Module (CEM), Rear Electronic Module (Rem), Upper Electronics Module (UEM) - Diagnostic Trouble Codes - 1 Of 13) >> CEM-1A26: Relay, 15I Power Supply. Signal Too High (2004) >> Diagnostic trouble code (DTC) information CEM-1A26

Diagnostic trouble code (DTC) information CEM-1A26

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.

Condition 

The central electronic module (CEM) checks the output signal to the relay coil for the 15i power supply relay.

Diagnostic trouble code (DTC) CEM-1A26 is stored if the central electronic module (CEM) registers that the output signal to the relay coil is too high.

Diagnostic trouble code (DTC) CEM-1A26 can be detected when activating the relay.

Substitute Value 

Possible Source 

Fault symptom[s]