Signal too high. Permanent fault: Verification: Verification
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Click on the VCT2000 symbol. To activate and deactivate the relay, click a number of times on "Start activation" and "End activation" for the current function.
Did the relay click?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to Information