Diagnostic trouble code (DTC) information AEM-6C56
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
Condition
The diagnostic trouble code (DTC) is stored if the control module registers that the signal is too low on the signal cable for alarm output S1.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on and alarm output S1 is activated.
Substitute Value
- Alarm output S1 is switched off until the next time the ignition is switched on.
Possible Source
- Short-circuit to ground in signal cable alarm output S1
- Damaged alarm.
Fault symptom[s]
- The alarm does not function at all.