Diagnostic trouble code (DTC) information AEM-6C53
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
Condition
The diagnostic trouble code (DTC) is stored if the control module registers that the signal is too high on the signal cable for alarm output P1.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is on and alarm output P1 is activated.
Substitute Value
- None.
Possible Source
- Short-circuit to supply voltage in the signal cable for alarm output P1
- Damaged alarm.
Fault symptom[s]
- The alarm does not function at all.