Installing engine compartment components
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the inner of the two hose couplings for the passenger compartment heater connecting sleeve in the firewall
- the charge air pipe for the turbocharger (TC)
- the hose between the intake manifold and charge air cooler (CAC)
- the clamp for the cable harness on the engine.
Tighten the nut for the rear engine pad. Tighten to 50 Nm .
Install:
- the air cleaner (ACL) housing assembly with the intake manifold and connections
- the ground lead for the mounting on the engine (where applicable)
- the upper torque rod between the wheel arches. Tighten the screws. Tighten to 50 Nm
- the screw for the torque rod to engine mounting. Tighten to 80 Nm .
Fill with coolant. Carefully check while reaching operating temperature or test driving that the level remains the same and that there is no leakage.
Also see Transmission replacement, post-checking .