LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S80 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Control Modules - Design And Function - 4 Of 4) >> The Controller Area Network (Can) (2001-2004) >> Error Management In The Controller Area Network (CAN) >> Electrical Faults

Electrical Faults

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.

In the event of errors in the signal levels on the communication cables for the central electronic module a diagnostic trouble code (DTC) is stored in the central electronic module. A check is carried out on each communication cable to the central electronic module, CAN L, CAN H on the low speed side and CAN L and CAN H on the high speed side There are two different levels which are detected (low or high).

This gives eight diagnostic trouble codes for detecting electrical faults.

The diagnostic trouble codes for electrical faults are CEM-DF0X for the low speed network and CEM-DF1X for high speed network.