Signal missing: Verification
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
HINT: After rectifying a fault, a verification should be carried out.
- Reinstall the connectors, components etc.
- Ignition on.
- Erase diagnostic trouble codes by clicking the VCT2000 symbol.
- Start the car. Allow the vehicle to run for 10 minutes.
- Read off diagnostic trouble codes (DTCs).
Does the diagnostic trouble code (DTC) for a communication fault recur (CEM-1A5X or CEM-1A6X)?
- YES
Refer to Information
- NO
OKAY: Troubleshooting has been completed.