Checking components and wiring

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.

Check the power supply cable between accessory control module terminal #B6 and the back-up (reversing) warning system connector. Check for a short-circuit to supply voltage.

Remedy as necessary.

Other information:

To connect the breakout box, see Connecting the breakout box. Accessory electronic module
To access or replace the accessory electronic module and connector, see Replacing the accessory electronic module
For information about signals, see Signal description. Accessory electronic module (AEM)
To access or replace the back-up (reversing) warning system, see Back-up warning sensor, replacing
To fault-trace wiring and terminals see Contents

Fig 1: Identifying Accessory Electronic Module Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Verification