Continuous Variable Valve Timing (CVVT): General

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.

The 6 cylinder turbo has the variable camshaft on the exhaust side. The camshaft has 15 camshaft degrees (30 crankshaft degrees) between its outer positions. The Continuous Variable Valve Timing (CVVT) unit for the turbocharged engine is bright metal.

The normally aspirated 6 cylinder has the variable camshaft on the intake side. The camshaft has 20 camshaft degrees (40 crankshaft degrees) between its outer positions. The Continuous Variable Valve Timing (CVVT) unit for the turbocharged engine is painted black.

The difference in the camshaft setting between the turbocharged and the normally aspirated engines is that the turbocharged engine uses a more compact Continuous Variable Valve Timing (CVVT) unit.

The Continuous Variable Valve Timing (CVVT)valve has different versions depending on whether it is used on the intake or exhaust side. The valve cannot be incorrectly installed.

The normally aspirated engine mainly uses the variable camshaft to obtain good starting capacity and good idling quality. The variable camshaft provides a torque increase of approximately 10% in the engine speed (RPM) range between 1500 - 3000 RPM. At certain engine speeds the camshaft adjustment is also used to keep emissions down.

The turbocharged engine mainly uses the variable camshaft to minimize emissions.