Connecting the breakout box: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Disconnecting Control Unit

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• DSA control module disconnected.
• Switch off all equipment that takes power from the battery (courtesy lighting, radio etc.).

  Connect an ohmmeter between #9 on the breakout box and the battery negative terminal.

  Fig 3: Identifying Breakout Box

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying Ohmmeter

  Courtesy of VOLVO CARS OF NORTH AMERICA.

The ohmmeter should read approximately 0 Ω. 

• OK 

  VERIFIED:  Troubleshooting has been completed.

• NOT OK 

  Refer to Information