Diagnostic trouble code information

Condition 

Fig 1: Identifying Steering Wheel Angle Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

If the steering wheel angle sensor (SAS) control unit registers that the voltage in either angle signal A or B is too low or too high, diagnostic trouble code SAS-0044 will be stored.

Substitute Value 

• Stabilising function disconnected.
• Anti-spin function blocked.

Possible Source 

• Internal fault in control unit.

Fault symptom[s] 

• Anti-spin warning lamp is on.
• Stabilising function not working.
• Anti-spin does not work.