Checking components and wiring: Notes
Check the signal cable between control module terminal #B44 and air conditioning (A/C) relay terminal #4. Check for a short-circuit to supply voltage.
HINT: Use a test lamp with at least a 3 W bulb to determine whether the cable is short-circuited to supply voltage.
Remedy as necessary.
Other information
- To connect the breakout box / access the control module, see Connecting the breakout box
- For information about signals on 5 cylinder engines, see Signal specification
- For information about signals on 6 cylinder engines:
- For 6 cylinder engines -2001, see Signal specification
- For 6 cylinder engines 2002-, see Signal specification
- For 6 cylinder engines -2004, see Signal specification
- For 6 cylinder engines 2005-, see Signal specification .
- See Checking wiring and terminals .
- Continue
Refer to Verification