Checking wiring and components: Notes
Check the heated oxygen sensor (HO2S) resistance between #1 and #2.
Check signal cable between heated oxygen sensor (HO2S) #2 and engine control module (ECM) #A36 (#A36) for a short-circuit to supply voltage according to Short-circuit to supply voltage. Permanent faults
HINT: Use an electrician's screwdriver with at least a 3 W bulb to determine whether the cable is short-circuited to supply voltage.
Remedy as necessary.
Other information
- Connecting the breakout box/accessing the control module, see Connecting the breakout box .
- To access/replace the heated oxygen sensor (HO2S), see Heated oxygen sensors (HO2S), replacing .
- For resistance values, see Component specifications .
- For information about signals:
- For 6 cylinder engines -2001, see Signal specification
- For 6 cylinder engines 2002-, see Signal specification
- For 6 cylinder engines -2004, see Signal specification
- For 6 cylinder engines 2005-, see Signal specification .
- Continue
Refer to Verification