Checking components and wiring: Notes

Check the cable that relates to the diagnostic trouble code (DTC). Check for a short-circuit to ground.

Check between:

• Engine control module (ECM) terminal #A16 (#A16) and injector terminal #2 (ECM-200D, injector 1)
• Engine control module (ECM) terminal #A34 (#A34) and injector terminal #2 (ECM-201D, injector 2)
• Engine control module (ECM) terminal #A15 (#A15) and injector terminal #2 (ECM-202D, injector 3)
• Engine control module (ECM) terminal #A33 (#A33) and injector terminal #2 (ECM-203D, injector 4)
• Engine control module (ECM) terminal #A14 (#A14) and injector terminal #2 (ECM-204D, injector 5).

Remedy as necessary.

Other information 

• See Connecting the breakout box
• See Signal specification
• See Injectors/pulsation dampers, replacing
• See Contents

Fig 1: Identifying Fuel Injector Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Injector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification