Signal too low: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Reinstall the connectors, components etc.
• Start the engine. Rev the engine to approximately 4000 RPM a few times
• Read off the diagnostic status and the fault status for diagnostic trouble code (DTC) ECM-3010.

  Check that the fault status is "NO FAULT FOUND" when the diagnostic status is COMPLETED. If the fault status is "FAULT FOUND" when the diagnostic status is COMPLETED there is a fault.

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the fault status "NO FAULT FOUND"? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information