LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2001 >> S80 Base >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control Module (BCM) Diagnostic Trouble Codes >> BCM-A030: Communication Between Control Modules. Steering Angle Sensor. Initialization Check Not Run (2005-2006) >> The-initialization: check has not been run >> Checking diagnostic trouble codes (DTCs)

Checking diagnostic trouble codes (DTCs)

If diagnostic trouble code (DTC) BCM-A030 is stored on its own it must be erased.

If diagnostic trouble code (DTC) BCM-0108 is stored at the same time as BCM-A030, read off the diagnostic trouble codes (DTCs) from the control module for the steering angle sensor. Fault-trace the system.

Select an option:

  1. Diagnostic trouble code (DTC) BCM-A030 is stored on its own. Refer to Erasing diagnostic trouble codes (DTCs) .
  2. Diagnostic trouble codes (DTCs) BCM-0108 and BCM-A030 are stored at the same time. Troubleshooting has been completed.
Fig 1: Identifying Steering Wheel Angle Sensor, Cables & Connectors
GLL105337Courtesy of VOLVO CARS OF NORTH AMERICA.
scientia non olet · About LEMON Manuals