Signal too low: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect the connectors, install the components, etc.
• Ignition on.
• Read off the current in the circuit.

  Turn the steering wheel to end stop in both directions.

  The current should oscillate between 11 and 30 mA.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the current OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information