Maintenance Service Reminder Reset - Procedure 11

NOTE: On some models, PROCEDURE 10 is also available.

NOTE: Service reminder light (if equipped) will come on at 5000 or 10, 000 mile intervals to indicate oil and filter change is scheduled. After changing oil and filter, reset mileage counter.

The SRI lights the first time the ignition is switched on after the service interval has been reached. The SRI will continue to illuminate, and remain illuminated, for 2 minutes every time the ignition is switched on or until it is reset. The SRI can be programmed for distance traveled, time since last service and engine hours since last service. Programming is done using the Volvo factory scan tool.

Starting from the 2002 model year, the need for service is indicated partly by the lamp and partly by a text message, TIME FOR SERVICE or TIME FOR REGULAR SERVICE. The SRI can be reset using the Volvo factory scan tool (or equivalent aftermarket scan tool), or using the following method.

NOTE: The service indicator message can also be reset using VIDA vehicle communication.

The service reminder indicator (SRI) informs the driver that it is time for the vehicle to be serviced. The text message is displayed for 120 seconds each time the ignition is switched on.

Ignition position I
Press and hold in the reset button for the trip odometer.
Turn the key to position II within 2 seconds, while continuing to press trip odometer reset button.
Hold the reset button for the trip meter pressed in until the original value has been reset and the general yellow lamp comes on.
Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded.
NOTE: The odometer reset button must be released within 4 seconds to reset the service indication message.
If the trip meter is already reset, the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds.