Combined instrument panel

Display for fault/warning/status messages, trip computer and car phone functions. Information is available in 11 different languages (programmable).

Use the Enter button to scroll between the various fault/warning messages.

There are three types of fault/warning/status messages with different grades of severity:

A.  The fault can be acknowledged and erased only after the fault has been erased.

B.  The message must be read off and confirmed before it is erased. Use the Enter button to confirm.

C.  The message is only displayed for approximately 10 seconds.

The display for the odometer and two trip odometers.

Short press on the button = shift between the trip odometers.

Long press on the button = reset the selected trip odometer.

The warning lamp may be red or orange when it is lit. One of the other warning lamps may also light at the same time and a message may be displayed.

Red lamp =  Stop the car. Read the message in the display.

Orange lamp =  Read the message in the display. Remedy as necessary.

Display for the selected gear (automatic transmissions), clock and outside temperature gauge.

Check/warning lamps (cars in the USA have different symbols for a number of the lamps).