Intermittent fault

If the diagnostic trouble code (DTC) for this fault is stored but the adaptation value is correct, the fault is intermittent. The cause of the intermittent fault is probably a defective camshaft reset valve.

HINT: Faults may result from dirt in the camshaft reset valve. Try cleaning the valve. 

Other information: 

• To clean the camshaft reset valve, see VVT solenoid, inspection and cleaning
• To replace the camshaft reset valve:
  • For B6xx4x -2001, see Variable valve timing solenoid, replacing
  • For B6xx4x 2002-, see Replacing the variable valve timing solenoid .
• To adjust the camshaft position (CMP), see Camshaft seal/variable valve timing (VVT) unit, replacing .

• Continue 

  Refer to Verification