Intermittent fault

HINT: The status of the diagnostic trouble code (DTC) indicates that the control module has previously registered a fault but that the fault is not now active. 

Check the connectors for the brake control module and the control module for the steering wheel angle sensor. Check for contact resistance and oxidation.

Check that the communication wiring is not too close to a source of interference such as a carphone etc.

Remedy as necessary.

Other information 

• For connection of breakout box to Steering wheel angle sensor module (SAS), see Connecting the breakout box to the steering angle sensor
• See Checking wiring and terminals .

• Continue 

  Refer to Information