Component Specifications
The component specification gives the value of the component when the connector is disconnected. Where no value is given, it is not possible to measure a relevant value at the component.
The figure within the brackets indicates the terminal pin on the component to which the value refers.
| Designation | Type | Supply voltage | Value | Other |
| Acceleration sensor suspension, left and right-side front | 5V (#5) |
Output signal (terminal #1) 0.5V - 4.5V | Resistance readings cannot be taken |
|
| Position sensor suspension, left and right sides rear | 5V (#5) |
Output signal (terminal #1) 0.5V - 4.5V | Resistance readings cannot be taken |
|
| Acceleration sensor body | 5V (#5) |
Output signal (terminal #1) 0.5V - 4.5V | Resistance readings cannot be taken |
|
| Keypad | 5V | - | ||
| Shock absorber solenoids | Ubat (#1) |
Pulse width modulated (PWM) signal | Approximately 5 Ω(terminals #1-#2) |