Checking supply
Check passenger compartment fuse 4 (11C/4:2).
Check the cable between the power seat module (PSM) connector #A1 and passenger compartment fuse 4 (11C/4:2). Check for an open-circuit. See Open-circuit, permanent faults
If the fuse has blown, fault-trace for a short-circuit to ground. See Short-circuit to ground, permanent faults .
Check connector (54/24:1)
Check passenger compartment fuse 24 (11C/24:2)
Check the cable between power seat module (PSM) supply relay (2/29) #3 and passenger compartment fuse 24 (11C/24:2). Check for a short-circuit to ground. See Short-circuit to ground, permanent faults . Check for an open-circuit. See Open-circuit, permanent faults .
Check that the relay is not defective.
Check the cable between the power seat module (PSM) connector terminal #B1 and power seat supply relay (2/29) #1. Check for a short-circuit to ground. See Short-circuit to ground, permanent faults . Check for an open-circuit. See Open-circuit, permanent faults .
Remedy as necessary.
Other information
- To connect the breakout box, see Connecting the breakout box, power seat module (PSM)
- For information about signals, see Signal specification, Power seat module .
Were any faults found?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Replace / program component