Circuit test, continued

Check the resistance between 2 and ground and between 4 and ground on the cable connector.

1. The ohmmeter shows an incorrect value between 4 and ground. Refer to Checking the ground wire .
2. The ohmmeter shows an incorrect value between 2 and ground. Refer to Checking the supply wire .
3. The ohmmeter shows the correct value. Troubleshooting has been completed.

Fig 1: Identifying Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.