Checking for a short circuit
Check the resistance between the fuse holder secondary side (left) and ground.
The ohmmeter should display infinite resistance.
If the value is correct, replace the fuse.
NOTE:
In this case the fault could be intermittent.
If the value deviates, trouble-shoot both the relay supply wire and component supply wire for a short circuit to ground as described in Short-circuit to ground, permanent faults .
HINT: Replace fuse.
HINT: If the fuse works straight away the fault is a short circuit on the relay supply wire.
HINT: If the fuse works when the boot lid is opened the short circuit is on the component supply wire
HINT: Relay supply wire: fuse 11D/6 5 relay socket 2/67.
HINT: Component supply wire: 4 relay socket 2/67 2 lock unit.
Additional information
- To access rear electronic module (REM), see Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing .