Volvo On-Board Diagnostic (OBD) System
With the VIDA PC it is possible to:
- read off and erase diagnostic trouble codes (DTCs), counters and frozen values
- continuously monitor the values and status of the input and output signals for the signals
- self-adjust the damper motors
- program the control module with certain information
- read off the control module identification.
The following conditions must be met before the Volvo on-board diagnostic (OBD) system is activated:
- the ignition must be on
- the battery voltage must be normal.
NOTE:
For self-adjustment of the damper motors the engine must be running at idle (generator (GEN) charging).